GAN Human Resources (HR) Aptitude Practice Test

These questions are part of the practice quiz. Start practicing

• What is the sum of 1/2 and 3/4 in simplest form?
• What is the result of adding 4/7 and 4/11?
• How do you handle a whole number when subtracting a fraction?
• Convert 1 2/5 to an improper fraction.
• Which option best defines velocity?
• Which principle most enhances stability during dynamic movement?
• What is the result of subtracting 5/8 and 1/2?
• Which of the following is a typical use for a beam-like girder?
• An improper fraction can be converted into which form?
• In the context of the paper folding test, which statement is true?
• What is 5.7288 divided by 0.93?
• Which of the following is the sum of 1/8 and 8/11?
• What is the product of 0.8 and 2.5?
• How are the dimensions of pipe threads determined?
• What is a common use of pulleys in elevator systems?
• What is the mixed number form of the improper fraction 99/10?
• What is the next term in the sequence: 4, 6, 8, 10, 12?
• What is the least common denominator for 2/9 and 4/15?
• Which statement correctly describes the versatility of vise grip pliers?
• What is 3 × (6 + 2)?
• What is 5/12 + 2/3 + 5/6?
• If you lower the center of gravity, what happens to stability?
• What is a practical daily life example of torque?
• When stacking objects, which factors influence stability?
• Which fraction is equivalent to 8/36 in lowest terms?
• What is the product of 3 and 0.4?
• Subtract 2.75 from 5.00. What is the result?
• What is the first step in multiplying fractions?
• What is 1.2 times 10?
• If you have .04, how many spaces do you move the decimal to the right to make it a whole number?
• What is the relationship between the center of gravity and stability in objects?
• How do you change 1/2 to have a denominator of 14?
• Which practice should be avoided when using a screwdriver?
• Compute (3/4) ÷ (2/3).
• What is the result of dividing 0.6 by 0.2?
• Which of the following is one of the three common types of girders used in steel fabrication?
• Which of the following is a mixed number?
• What should you pay attention to when taking the paper folding test?
• Change 2/3 to denominator 36.
• In the sequence 1, 5, 9, 13, what is the next term?
• What is the best drill option for boring deep holes?
• What is the least common denominator of 2/3 and 1/4?
• Which real-world application uses pulleys to lift heavy objects?
• Which statement about reducing fractions is true?
• What is the next number in the sequence: 57, 56, 54, 51?
• Which of the following is NOT one of the three common types of girders used in steel fabrication?
• What is the reduced form of 18/20?
• Add 1.5 and 2.25. What is the sum?
• Which statement accurately describes the inverted girder?
• What is the result of adding 1/6 and 1/5?
• In a pulley system, what is the effect of increasing the number of supporting cables on the force needed to lift a weight?
• What method can be used to obtain a common denominator if the lowest common denominator is difficult to find?
• Convert 55/63 to a decimal approximation.
• Which shank type is used for stationary drill presses and some heavy duty portable tools?
• What is the product of 0.84 and 8.2?
• What is the time limit for the reading comprehension practice test?
• Which operation describes the sequence 7, 8, 16, 19, 76?
• What is a gable roof?
• What is the common denominator used when adding 1/3 and 7/17?
• What is the final step after adding the numerators in fraction addition?
• Add 1/2 and 1/3.
• How do you position the decimal point in the answer when dividing decimals?
• What is the reduced form of 10/16?
• Which statement about non-ratcheting die stocks is true?
• What is a tapered shank bit used for?
• In the sequence 57, 56, 54, 51, what is the next term?
• Compute the sum of 3/8 and 5/8.
• What should you do if the result of adding fractions is an improper fraction?
• In the sequence 1458, 162, 18, 2, 2/9, what is the fourth term?
• What is the next number in the sequence 7, 8, 16, 19, 76?
• What is an effective way to visualize problems in the mechanical comprehension test?
• Which pattern best describes the sequence 910, 900, 450, 440, 220?
• What is the next number in the sequence 1000, 200, 40, 8, 1.6?
• What is the product of 2.9 and 6.3?
• How are non-ratcheting stocks operated?
• What does reducing fractions mean?
• What is the next number in the series: 1, 5, 9, 13?
• What is 9 moved two decimal places to the right?
• Divide 2.0853 by 0.21.
• What is the simplified result of subtracting 3/4 and 1/4?
• Compute 1/3 - 2/7.
• What is the product of 6.7 and 0.42?
• To express a whole number as a fraction, which denominator should you use?
• Which statement identifies the two primary die types?
• In a balance problem with opposing weights, which statement best describes the movement direction to counteract the imbalance?
• What is the lowest common denominator for denominators 6 and 8?
• What is the sum of 2/5 and 3/10?
• What is the next term in the sequence: 7, 12, 24, 29, 58?
• Convert 3/5 to denominator 15.
• What is the least common denominator for 3/5 and 4/15?
• What should be avoided when using a screwdriver?
• If the divisor is a decimal, what should you do to the number on the outside of the division to simplify?
• How does gear size affect rotation speed?
• Which pole bears more weight in a balance scenario?
• Compute 2 1/3 * 3/4.
• Which pliers are specifically designed for reaching into tight spaces to grip small objects?
• Which description defines an internal thread?
• What is the result of adding 1/3 and 3/8?
• What is the product of 0.26 and 4.4?
• What is the result of 1/4 ÷ 1/2?
• What is the product of 0.3 and 0.2?
• What is the primary function of a pulley system in lifting loads?
• Which statement describes the standard process for converting a percentage to a decimal?
• What is an external thread?
• What is the sum of 1/3, 2/5, and 5/12 in simplest form?
• Which option best describes the emphasis of the mechanical comprehension concept in daily life?
• What is 0.04 multiplied by 10?
• What is a gambrel roof?
• Find the lowest common denominator of 6 and 8.
• What is the first step in dividing a mixed number by a fraction?
• Compute 84 plus 36 minus 17.
• Which value equals 155.2 divided by 2?
• When subtracting decimals, how should you handle differing decimal lengths?
• What determines the direction of rotation for adjacent gears in a gear train?
• Compute 1/2 - 4/11.
• If a fraction is already in lowest terms, what does that mean?
• What are the two ends of a drill bit called?
• What is a receding die?
• Which measurement best describes screwdriver blade size?
• What is 3 7/8 − 2 1/4?
• What is the first step in subtracting mixed numbers?
• What does 6.2 become when you move the decimal two places to the right?
• Compute the sum of 6/7, 1/6, and 3/14.
• What is the result when you subtract 4/5 from 7?
• Which pliers are commonly used for bending or cutting wire?
• What is the effect of screw diameter on penetration speed?
• What is the first step in subtracting fractions?
• Which term describes the distance from one end of a structure to the other along its length?
• What tool is used to cut internal threads?
• What is the first step in dividing 5/6 by 3?
• What is the reduced form of 35/40?
• What is 1/3 multiplied by 3 3/4?
• What is the result of dividing 1/4 by 4/5?
• Compute 7/8 - 1/4.
• Which statement describes an external thread?
• Which statement best illustrates torque in a lever system?
• Compute 1/3 divided by 2/5.
• What is the result of adding 1/8 and 8/11?
• What is 499.29 divided by 5.1?
• Convert 9/4 to a mixed number.
• What is 4/7 ÷ 3/8?
• What describes an unreduced fraction?
• Which value equals 7.82 divided by 2?
• What is 1/2 + 3/4 + 4/5 + 9/10?
• What is a proper fraction?
• What is the least common denominator for the fractions 1/5 and 1/9?
• What is 6 1/2 multiplied by 3 2/3?
• Which statement best describes the step to find a common denominator for two fractions?
• What is half the distance of the span called?
• What is 6.2 divided by 0.04?
• What is a full width die?
• A typical girder design often includes which features?
• What is 2.34 + 8.7?
• Convert 29/40 to a decimal.
• Which value equals 0.7959 divided by 0.21?
• In lifting scenarios, how does distributing weight across more cables affect the force required?
• What is the next term in the sequence 1/2, 1/3, 2/9, 4/27, 8/81?
• What is the purpose of diagonal cutting pliers?
• Convert the mixed number 6 5/6 to an improper fraction.
• What do you do with the numerators when adding fractions?
• What is a common denominator?
• Which gear will rotate faster if gear A is smaller than gear B?
• What does the mechanical comprehension test reflect?
• What is the lowest common denominator of 2/3 and 5/36?
• What is the first step in subtracting decimals?
• What is 5 4/5 divided by 8?
• What is 4 2/3 − 1 1/6?
• How do you convert the mixed number 4 2/3 to an improper fraction?
• Convert 25/12 to a mixed number.
• Dividing by 1/4 is equivalent to which operation?
• What is the result of 4/5 - 3/4?
• What is the lowest common denominator for the fractions 1/2 and 2/3?
• Which of the following is a type of drill bit shank?
• In the sequence 7, 12, 24, 29, 58, which is the fifth term?
• In a balance problem, how can you determine the direction a box should move?
• What is the next term in the sequence: 2, 4, 8, 16, 32?
• How is the size of screwdrivers measured?
• What is a hip roof?
• What is 28% of 96?
• What is the lowest common denominator?
• In the product of fractions, the new numerator is the product of the numerators and the new denominator is the product of the denominators.
• Convert 18/5 to a mixed number.
• What is the result of adding 2/3 and 3/5?
• What is a mixed number composed of?
• Which of the following is a correct equivalent of 35/40?
• Which roof type features two slopes on each side with a break in the top slope?
• What is the result of 7.61 - 4.32?
• Convert the improper fraction 116/15 to a mixed number.
• Convert 8% to a decimal.
• What is the result of adding 5/6 and 1/19?
• Which bit type is typically used to drill holes in metal?
• What is the sum of 12.30 and 4.56 after aligning decimals?
• Convert 23 5/6 to an improper fraction.
• In a gear pair where gear A has fewer teeth than gear B, which gear rotates faster?
• What is the result of punching a hole in the bottom left of the folded paper?
• What is 7.82 divided by 2?
• What is 6 divided by 2?
• Which fraction is equivalent to 2/7 when expressed with denominator 14?
• What is the sum of 1/5, 2/9, and 4/45?
• Which die type is typically used for larger pipe sizes?
• What is the result of 3.32 + 1.43?
• What is the consequence of using a screwdriver that is too small for the screw?
• What is the next term in the sequence: 1458, 162, 18, 2, 2/9?
• Compute 9/10 - 3/5.
• What is the mixed number equivalent of the improper fraction 64/9?
• A key feature of girders in steel fabrication is that they usually have stiffeners in which arrangement?
• Which description defines an external thread?
• Which of the following is an example of an improper fraction?
• How does gear size affect rotation speed in mechanical systems?
• What is the first step in solving a mechanical comprehension problem?
• When are full width dies used?
• Which of the following is the reduced form of 18/20?
• What is the next term in the sequence: 2, 11, 9, 18, 16?
• Compute 3/8 - 2/11.
• What is the result of 2 1/3 minus 1/2 after converting to improper fractions?
• What is the result of 19 - 3.657?
• Compute the product of 2 1/2 and 5/6.
• Convert 3/4 to an equivalent fraction with denominator 16.
• What is 155.2 divided by 2?
• Which description correctly identifies an internal thread?
• How do you divide fractions?
• Which of the following is a common type of girder?
• What is the improper fraction for the mixed number 2 3/4?
• Convert 3 1/4 to an improper fraction.
• What type of pliers increases gripping power and can hold hot or cold objects?
• What happens when the paper is folded from left to right?
• What is the mixed number equivalent of 17/5?
• What is 0.75 + 0.005 + 1.25?
• What is the common denominator for 1/2 and 2/7?
• What is the first step in dividing decimals?
• Calculate the product of 1/3 and 4/5.
• When solving arithmetic problems, what should you pay attention to?
• What is the sum of 5/6 and 7/15 in simplest terms?
• What is the product of 8.6 and 0.33?
• What is 6 4/5 minus 3?
• What type of pliers are useful for bending or cutting wire?
• What are non-ratcheting die stocks?
• What is the lowest common denominator for 3 and 5?
• Convert 7/8 to denominator 32.
• What is the product of 32.4 and 6.03?
• Compute 2/5 + 3/7 + 1/35.
• What is a first step when adding decimals?
• Which statement best describes how drill sizes are named?
• How does the diameter of a screw affect its penetration speed?
• When adding two fractions with the same denominator, how should you add?
• What is the sum of 4/7 and 4/11?
• What does a receding die do?
• What is the improper fraction form of the mixed number 3 1/4?
• Which statement about threading is correct?
• What is the product of 0.68 and 5.6?
• What is the sum of 5/6 and 1/19?
• Which statement best describes the window blind pulley use?
• What is 5.5 × 2.35?
• Compute 1/3 - 1/5.
• What is 6% of 34?
• How do you determine the decimal placement in multiplication of decimals?
• What is 8.04 minus 2.67?
• What is the quotient of 1.4 divided by 4?
• What is the simplified form of 18/12?
• Which statement best describes velocity?
• Which statement about pipe threads is true for creating a fluid-tight joint?
• What is 84 + 36 - 17?
• What is the sum of 2/3 and 1/4?
• What is the next number in the sequence: 5, 10, 30, 120?
• What is the sum of 7.25 and 2.05?
• What is 2.5 times 0.4?
• What is the mixed number form of the improper fraction 25/9?
• What is the benefit of the single twist auger bit?
• Convert the improper fraction 11/4 to a mixed number.
• Convert 67% to a decimal.
• How do you convert a whole number into a fraction?
• What is the sum of 1/4 and 7/8?
• What is the first step in reducing a fraction?
• When are receding dies used?
• What is the result of dividing 3.75 by 3?
• What is the next term in the sequence: 21, 42, 63, 84, 105?
• How do you subtract the numerators when subtracting fractions?
• What is the next number in the sequence: 3125, 625, 125, 25?
• Which description best fits wood bits for power tools?
• What is the next number in the sequence: 2040, 408, 102, 34?
• How do you convert a mixed number to an improper fraction?
• What is 4/9 plus 3/7?
• What is the improper fraction form of 2 3/8?
• What term describes the slant of a roof?
• What is the next term in the sequence: 70, 7, .7, .07, .007?
• What is the decimal form of 3 4/5?
• Why is finding a common denominator important when adding or subtracting fractions?
• What is the result of multiplying 2/3 by 3?
• What is the product of 1/9 and 1 3/7?
• Compute 6/7 - 1/2.
• How do window blinds utilize pulleys?
• What is a twist drill used for?
• What is the result of adding 1/5 and 1/2?
• What should you look for in the text to help answer comprehension questions?
• When multiplying fractions with 5 x 1 and 6 x 3, what is the resulting fraction?
• Which object requires less force to move in a given direction?
• Compute 5 1/2 - 1 4/7.
• How are plier sizes determined?
• What is 6.4 ÷ 4?
• Which statement about the width of a full width die is true?
• Which of the following is the first operation when subtracting fractions with unlike denominators?
• Which fraction is fully reduced?
• What is the improper fraction form of 6 1/5?
• What is a mixed number?
• How are drill sizes commonly designated?
• Which operation describes the sequence 1000, 200, 40, 8, 1.6?
• What happens to the diameter of a screwdriver blade as the length increases?
• What is the solid center auger bit used for?
• Compute 2 5/6 - 1/3.
• Convert the improper fraction 24/3 to a whole number.
• Which statement best describes an improper fraction?
• How do you change the division sign when dividing fractions?
• In the sequence 2040, 408, 102, 34, what is the next term?
• What is the next term in the sequence: 5, 5, 10, 30, 120?
• What is the next number in the sequence 910, 900, 450, 440, 220?
• Compute the sum of 2/3 and 4/5.
• What is the next term in the sequence: 1/2, 2/3, 3/4, 4/5, 5/6?
• What is a recommended practice method for the paper folding test?
• Compute 24 plus 36 minus 4.
• In a curve, which vehicle is more stable due to its center of gravity?
• Which occupation commonly uses pulley systems with multiple pulleys to reduce effort when lifting shingles to a roof?
• What is the first step in adding fractions with different denominators?
• Compared with the double twist auger bit, the single twist auger bit provides which advantage?
• How do you ensure each number has the same number of digits after the decimal when subtracting?
• Which factors influence the choice of girders?
• Which statement describes the rotation behavior when two gears of different sizes mesh?
• In a pulley system, what effect does adding more cables have on the distribution of the load?
• What is the result of 2/3 ÷ 5/6?
• What are wood bits for power tools typically like?
• Convert 3 4/5 to an improper fraction.
• What is the result of subtracting 36.34 from 47?
• What is the final step after subtracting the numerators in fraction subtraction?
• What is 0.5 divided by 0.5?
• In a gear system, how does the rotation speed of a smaller gear compare to a larger gear?
• What term describes the distance from one roof eave to the opposite eave?
• Which action lowers a skater's center of gravity during a triple axle?
• What is the next number in the sequence: 0, 0, 2, 6, 12?
• What is the sum of 1/8 and 2/8?
• How do you align numbers when adding decimals?
• Convert the mixed number 2 1/3 to an improper fraction.
• What is the result of dividing 1/4 by 2/3?
• Compute 10.07 minus 6.89.
• What is 7/8 ÷ 14/9?
• Convert 38/7 to a mixed number.
• Which roof type has a ridge and slopes on two sides with a triangular end?
• Which rule describes the sequence 1/2, 1/3, 2/9, 4/27, 8/81?
• How do the back wheels of a tricycle compare to the front wheel in terms of rotation speed?
• What factors influence the choice of girders?
• What is the result of adding 1/3 and 7/17?
• Compute the product of 3/5 and 5/7.
• What is 8.72 divided by 5?
• How does the number of cables affect the weight distribution in a pulley system?
• In the sequence 0, 0, 2, 6, 12, what is the next term?
• What is the product of 1 1/5 and 1/6?
• Which statement describes a fraction where the numerator is smaller than the denominator and can be reduced?
• What is the improper fraction equivalent to 2 1/6?
• Convert 41/6 to a mixed number.
• What percent of 120 is 36?
• What should you do if there aren't enough digits in a number when moving the decimal to the right?
• What is the product of 0.5 and 0.2?
• What is the final answer when dividing 2 3/4 by 1/2?
• What is 4.2 ÷ 0.007?
• What is 38.43 minus 7.62?
• Which action increases the mechanical advantage of a pulley system?
• What is the result of dividing 0.7959 by 0.21?
• What is the result of adding 1/2 and 3/15?
• What is the function of adjustable joint pliers?
• What are vise grip pliers?
• Convert 32/9 to a mixed number.
• What is the reduced form of 8/36?
• Which fraction is in lowest terms?
• What is the next number in the sequence: 7, 8, 6, 8, 4, 7, 1?
• What is 5 percent of 64?
• What is 8/9 minus 2/3?
• What is the correct blade orientation when fastening a screw?
• What is the result of adding 3 3/4 and 5/6?
• Convert 30% to a decimal.
• The least common denominator for 3/5 and 1/6 is what?
• What is 18% of 50?
• In the sequence 2, 11, 9, 18, 16, what is the third term?
• What is the result of 24 plus 36 minus 4?
• What is the simplified form of 4/6 in lowest terms?
• What is the product of 2.9 and 6.3?
• In a two-gear system, if the driving gear has fewer teeth than the driven gear, what happens to the driven gear's speed?
• Convert 5/6 to denominator 12.
• Convert 53/7 to a mixed number.
• If you can't find the lowest common denominator, how can you obtain a common denominator?
• What is the first step in reducing the fraction 6/12?
• What is 5.35 ÷ 0.5?
• Compute 2/3 divided by 7/9.
• Where is the hole punched in the folded paper?
• What is the next term in the sequence: 4, 5, 10, 11, 22?
• What is the purpose of the paper folding test?
• What is 2.36 ÷ 0.4?
• What tool is used to cut external threads?
• What is the product of 3/4 and 7?
• What is the reduced form of 2/4?
• What is the correct position of the screwdriver blade when fastening a screw?
• In the sequence 4, 5, 10, 11, 22, what is the third term?
• What is the sixth term of the sequence 70, 7, .7, .07, .007, ?
• What is the result of 1.004 + 2.4?
• What is the advantage of the double twist auger bit?
• If a piece of paper with a single hole punched along the center line is unfolded, what happens?
• Which statement correctly describes center of gravity and stability?
• What is the purpose of shoe plates in girder construction?